One of the most requested tips is how to remove crud: plastic, rubber, nylon, or other melted residue on hot parts of a motorcycle (typically, exhaust pipes). There is no simple instant solution. Removal of melted residue is a labor intensive and slow process. However, with patience and physical effort, the crud will come off.After the exhaust pipes (motorcycle) are cool to the touch, soak the crud with a petroleum based product over night or longer. (Use an old cotton sock or similar - non-dyed - rag). I have tried: carburator cleaner, gasoline, and fuel oil. A few other solvents and cleaners have limited success: acetone, paint thinner, mineral spirits, wood alcohol, chrome cleaner, and rubbing compound.Plastic (non-abrasive scrubbers), old white cotton socks, and polishing cloth were used as applicators for the various listed products. As stated, crud removal is a slow, laborious process. Be patient. The crud will eventually loosen.
__________________________________________________
Arnold
Our mission is to provide high quality end to end solutions to the BPO segment in a manner that will improve the operational efficiency while reducing the cost of the services to the client.
4thdimension1@gmail.com
